| Brand | Wone Store |
| Model NO. | JSZV18-24RJ Voltage Transformer |
| Rated frequency | 50/60Hz |
| Primary voltage | 20kV |
| Secondary voltage | 100/220V |
| Series | JSZV |
Product Overview
JSZV18-24RJ voltage transformer, is fully enclosed casting insulation structure, the primary winding, secondary winding and the annular core all coating in the epoxy resin casting, The product adds elbow type plug part, improving the filth and moisture resistance, is widely used indoor for measuring current, electric energy and protective relaying in the isolated neutral system with the frequency 50-60Hz and highest voltage for equipment 24 kV.
Key Features
Wide Voltage Range Adaptability：The JSZV18-24RJ voltage transformer can adapt to significant voltage fluctuations based on the rated 24kV. It not only ensures normal operating voltage monitoring but also stably outputs accurate signals during transient voltage fluctuations or system voltage regulation, safeguarding the normal operation of measurement and protection systems.
Fast Response Characteristics：With high-speed voltage signal response capability, it captures voltage changes in an extremely short time and converts them into secondary-side signals. When sudden voltage surges or drops occur in the power system, it provides timely signals for relay protection devices to quickly cut off faulty circuits.
Low Hysteresis Loss：Using special magnetic materials and optimized design, it achieves extremely low hysteresis loss, reducing energy loss during conversion, improving transformer efficiency, minimizing long-term operational heating, and enhancing equipment stability and service life.
Technical Parameters
Rated primary voltage：20kV or 22kV
Rated secondary voltage：100V,100/100V,100/220V
Rated voltage of residual voltage windings：100/ 3V 、110/ 3V、 115/ 3V、 120/ 3V
Burden power factor: cosΦ=0.8(lagging)
Standards: IEC60044-2.2003 or IEC61869-1&3
Other technical parameters pls see as follow:
Remarks: Upon request we are glad to offer transformers according to other standards or with non-standard technical specs.
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
-
Outdoor Voltage Transformer (VT/PT) Solution: The Reliable Guardian Conquering Extreme EnvironmentsCore Value Proposition:This solution is specifically engineered for demanding outdoor environments, ensuring voltage transformers maintain exceptional electrical accuracy and rock-solid mechanical reliability under extreme challenges like wind, frost, rain, snow, salt fog, pollution, drastic temperature fluctuations, and seismic vibrations. It serves as a steadfast guardian for the safe and stable operation of power grids.Core Challenges & Targeted Solutions:Extreme Cold Challenges (-Wone Store07/19/2025 -
High - Efficiency, Simplified, Smart: Outdoor VT/PT Solutions for Installation, Commissioning & O&MIn power grid construction and refurbishment projects, the installation efficiency, commissioning accuracy, and O&M convenience of outdoor Voltage Transformers (VTs/PTs) directly impact project timelines, operational costs, and system reliability. This solution is specifically designed to optimize the full lifecycle management of outdoor VTs/PTs. Through innovative technologies and lean design, it significantly enhances the efficiency and safety of construction, acceptance testing, and O&amWone Store07/19/2025
